LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1032 (Engine Mechanical - 6.6L (Lb7) (Repair Instructions 2 Of 4)) >> Repair Instructions (Off-Vehicle - Part 2) >> Intake Manifold Removal - Right

Intake Manifold Removal - Right

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required 

J 37228  Seal Cutter

  1. Remove the right intake manifold bolts and nuts. Do not forget to remove the bolt inside the intake manifold tube.
  2. Separate the intake manifold from the cylinder head using J 37228  .
  3. Remove the right intake manifold.
    4. Fig 1: View Of Right Intake Manifold
    GM660465Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals