LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1032 (Engine Mechanical - 6.6L (Lb7) (Repair Instructions 2 Of 4)) >> Repair Instructions (Off-Vehicle - Part 2) >> Cooling Fan Pulley Removal

Cooling Fan Pulley Removal

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the camshaft position sensor connector.
  2. Remove the cooling fan pulley bolts and nuts.
  3. Remove the cooling fan pulley and insulator pad.
    4. Fig 1: View Of Cooling Fan Pulley, Insulator Pad, Bolts & Nuts
    GM660337Courtesy of GENERAL MOTORS CORP.
  4. Remove the camshaft position sensor retaining bolt.
  5. Remove the camshaft position sensor.
    6. Fig 2: View Of Camshaft Position Sensor
    GM660340Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals