LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1030 (Engine Mechanical - 4.8L, 5.3L & 6.0L (Repair Instructions - 2 Of 3)) >> Repair Instructions (Off-Vehicle Repair Instructions Part 2) >> Throttle Body Removal

Throttle Body Removal

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: The intake manifold, throttle body, fuel injection rail, and fuel injectors may be removed as an assembly. If not servicing the individual components, remove the manifold as a complete assembly.
  1. Remove the electrical wire harness connectors from the throttle body.
  2. Remove the engine coolant air bleed hose and clamp.
  3. Remove the throttle body nuts.
  4. Remove the throttle body.
    5. Fig 1: View Of Throttle Body & Nuts
    GM825837Courtesy of GENERAL MOTORS CORP.
  5. Remove the throttle body gasket (509).
    6. Fig 2: View Of Throttle Body Gasket
    GM1277091Courtesy of GENERAL MOTORS CORP.
  6. Discard the gasket.
  7. Remove the throttle body studs, if required.
scientia non olet · About LEMON Manuals