LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1023 (Rear Suspension System) >> Repair Instructions >> Stabilizer Shaft Replacement (35 Series) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the stabilizer shaft link bolt (5) from the frame (1).
    Fig 1: Removing The Stabilizer Shaft Link Bolt From The Frame (35 Series)
    GM661062Courtesy of GENERAL MOTORS CORP.
  3. Remove the stabilizer shaft insulator brackets (2) from the rear axle (3).
    Fig 2: Removing The Stabilizer Shaft Insulator Brackets From The Rear Axle (35 Series)
    GM661064Courtesy of GENERAL MOTORS CORP.
  4. Remove the stabilizer shaft.
scientia non olet · About LEMON Manuals