LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1021 (Vibration Symptoms Diagnosis And Correction) >> Repair Instructions >> Tire and Wheel Assembly Balancing - Off-Vehicle >> Tire and Wheel Assembly Balancing Guidelines >> Notes

Tire and Wheel Assembly Balancing Guidelines: Notes

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Tire and wheel assemblies which exhibit excessive runout can produce vibrations even if the assemblies are balanced.
It is strongly recommended that the tire and wheel assembly runout be measured and corrected if necessary BEFORE the assemblies are balanced.

If the runout of the tire and wheel assemblies has not yet been measured, refer to Tire and Wheel Assembly Runout Measurement - Off-Vehicle  before proceeding.

There are 2 types of tire and wheel balance:

scientia non olet · About LEMON Manuals