Tire Hoist Secondary Latch Mechanism
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
If the spare tire hoist has been fully raised without a spare tire in place, the secondary latch mechanism may have become engaged. If this has occurred the hoist will not lower and the following steps will need to be followed:
- Rotate the hoist shaft counterclockwise until approximately 15 cm (6 in) of cable (1) is exposed.
- While holding the latch pin (3), fully depress the latch button (2) and release the secondary latch from the hoist assembly. Some side-to-side and/or up-and-down movement may be necessary to disengage the latch mechanism.
- Continue rotating the hoist shaft counterclockwise in order to lower the hoist the rest of the way.
- If this does not release the secondary latch, the spare tire hoist will need to be replaced. See the following procedure.