Rear Axle Shaft Seal and/or Bearing Replacement: Notes

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 8092 Universal Driver Handle-3/4 in - 10. See Special Tools and Equipment .
J 21128 Axle Pinion Oil Seal Installer (8.6 inch Axle). See Special Tools and Equipment .
J 23690 Axle Shaft Bearing Installer (8.6 inch Axle). See Special Tools and Equipment .
J 2619-01 Slide Hammer. See Special Tools and Equipment .
J 29709 Wheel Bearing Installer (9.5 inch Axle). See Special Tools and Equipment .
J 29712 Wheel Bearing Remover (9.5 inch Axle). See Special Tools and Equipment .
J 29713 Axle Seal Installer (9.5 inch Axle). See Special Tools and Equipment .
J 44685 Rear Axle Seal and Bearing Remover (8.6 inch Axle). See Special Tools and Equipment .