LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1014 (Rear Drive Axle) >> Repair Instructions >> Lubricant Replacement - Rear Drive Axle (8.6 Inch Axle) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the rear axle fill plug.
  3. Fig 1: View Of Rear Axle Fill Plug
    GM392774Courtesy of GENERAL MOTORS CORP.
  4. Remove the rear axle housing cover bolts (1). Discard the rear axle housing cover bolts.
  5. Carefully remove the rear axle housing cover (2) and drain the lubricant into a suitable container.
  6. Fig 2: Identifyng Rear Axle Housing Cover & Bolts
    GM341650Courtesy of GENERAL MOTORS CORP.
  7. Remove any gasket material from the rear axle housing and/or the rear axle housing cover.
  8. Inspect the bottom of the rear axle housing for excessive metal particle accumulation. This accumulation is an indication of extreme wear.