LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1010 (Suspension Control System - Suspension Damping) >> Repair Instructions >> Electronic Suspension Ride Control Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connector.
  2. Fig 1: Installing The Switch Into The Lower Opening Of The Switch Plate Panel
    GM361792Courtesy of GENERAL MOTORS CORP.
  3. Install the switch into the lower opening of the switch plate panel.
  4. Install the instrument panel trim bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages and Console.