LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Instrument Panel - Analog) >> Removal & Installation >> Park/Neutral Position (PNP) Switch >> Removal

Park/Neutral Position (PNP) Switch: Removal

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1999 Oldsmobile Bravada, 1999 GMC Sonoma, 1999 GMC Jimmy, 1999 GMC Envoy, and 1999 Chevrolet S10 Pickup. However, it is still accessible from the selected car via links, so may be relevant.

Apply parking brake. Place transmission shift lever in Neutral position. Raise and support vehicle. Remove transmission control lever retaining nut and transmission control lever. Remove PNP switch retaining bolts. Disconnect PNP switch wiring at in-line harness connector, located several inches from PNP switch. Using a file, remove any burrs from outer edge of manual shaft. Remove PNP switch from manual shaft.

scientia non olet · About LEMON Manuals