Installation Procedure
WARNING: This page is about a different car, the 2004 GMC Sierra and 2004 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the auxiliary oil cooler to the vehicle.
- Install the bolts (1) and the push pins (2) that retain the auxiliary oil cooler to the radiator brace.
Tighten: Tighten the bolts to 12 N.m (9 lb ft).
- Connect the transmission oil cooler lines to the auxiliary cooler. Refer to Transmission Fluid Cooler Line Quick Connect Fitting .
- Install the front grill assembly. Refer to Grille Replacement (GMC) or Grille Replacement (Chevrolet) in Exterior Trim.
NOTE:
Refer to Fastener Notice in Cautions and Notices.