LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1008 (Automatic Transmission - 4L60-E/4L65-E (Introduction, Service & Replacement)) >> Repair Instructions >> Flexplate Replacement (5.3L Engine w/RPO HP2) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra and 2004 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the flexplate.
    Fig 1: Installing The Flexplate
    GM1281915Courtesy of GENERAL MOTORS CORP.
  2. Install the flexplate bolts.

    Tighten:  Tighten the bolts to 100 N.m (74 lb ft).

    3. Fig 2: Removing J 46093 (1) And Bolts
    GM1277133Courtesy of GENERAL MOTORS CORP.
  3. Remove the J 46093  (1) and bolts.
  4. Install the transmission. Refer to Transmission Replacement (5.3L Engine w/RPO HP2) .
scientia non olet · About LEMON Manuals