LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1007 (Transfer Case - NVG 149-NP3) >> Repair Instructions >> Transfer Case Shield Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra and 2004 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the transfer case shield, if equipped.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the transfer case shield bolts, if equipped.

    Tighten:  Tighten the bolts to 20 N.m (15 lb ft).

    3. Fig 1: View Of Transfer Case Shield & Bolts
    GM826834Courtesy of GENERAL MOTORS CORP.
  3. Lower the vehicle.
scientia non olet · About LEMON Manuals