LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Wheel Alignment Specifications & Adjustment Procedures) >> Wheel Alignment Procedures >> Camber & Caster Adjustment >> "C"& "K" Old Style & "G" Series (Caster Adjustment )

"C"& "K" Old Style & "G" Series (Caster Adjustment )

WARNING: This page does not describe the selected car, but rather 47 other vehicles, including the 2001 Pontiac Montana, 2001 Pontiac Aztek, 2001 Oldsmobile Silhouette, 2001 Oldsmobile Bravada, and 2001 GMC Sonoma. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check frame angle. See "C" & "K" OLD STYLE & "G" SERIES (FRAME ANGLE)  . If corrected caster is not within specification, remove frame bracket slots. See "C" & "K" OLD STYLE & "G" SERIES (FRAME BRACKET SLOT REMOVAL)  . Reset caster by loosening nut on end of each cam bolt securing upper control arm to frame brackets. See Figure .
  2. Rotate cam bolts until caster is within specification. See WHEEL ALIGNMENT SPECIFICATIONS  table. Tighten nuts to specification. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals