Thickness Variation Check
WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 1998 Pontiac Trans Sport, 1998 Oldsmobile Silhouette, 1998 Oldsmobile Bravada, 1998 GMC Yukon, and 1998 GMC Suburban. However, it is still accessible from the selected car via links, so may be relevant.
Check thickness variation by measuring the rotor thickness at four or more points around the circumference of the rotor. Use a micrometer calibrated in ten-thousands of an inch. Make all measurements at the same distance in from the edge of the rotor. A rotor measuring thicker than .0005" (.013 mm) can cause pedal pulsation and/or front end vibration during brake applications. A rotor like this should be refinished or replaced.