Conditions For Running DTC

DTCs P0101, P0102, P0103, P0106, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0121, P0122, P0123, P0131, P0132, P0134, P0135, P0151, P0152, P0154, P0155, P0200, P0300, P0442, P0446, P0452, P0453, P0455, or P0496 not set.
The engine run time is more than 160 seconds.
Engine speed is 1200-3000 RPM.
Engine Coolant Temperature (ECT) sensor is more than 140°F (60°C).
Mass Airflow (MAF) sensor is 18-55 g/s.
The loop status is Closed.
Throttle Position (TP) sensor is more than 5 percent.
Fuel tank level remaining is more than 10 percent.
Ignition 1 signal voltage is 10-18 volts.
Scan tool output controls are not active.
The intrusive tests are not in progress.
Evaporative (EVAP) emissions purge solenoid command is more than 1 percent.
Conditions are met for 100 seconds.