Conditions For Running DTC

DTCs P0101, P0102, P0103, P0106, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0121, P0122, P0123, P0131, P0132, P0134, P0135, P0151, P0152, P0154, P0155, P0200, P0300, P0442, P0446, P0452, P0453, P0455, or P0496 not set.
ECT Sensor parameter is more than 60°C (140°F).
EVAP Purge Solenoid Command parameter is more than 1 percent.
MAF Sensor parameter is between 18-55 g/s.
Engine Speed parameter is 1200-3000 RPM.
TP Sensor parameter is more than 5 percent.
Loop Status parameter is closed.
Ignition 1 Signal parameter is 10-18 volts.
Fuel Tank Level Remaining parameter is more than 10 percent.
Engine Run Time parameter is more than 160 seconds.
Conditions are met for 100 seconds.