Installation Procedure
NOTE:
Do not reuse the engine front cover. Oil leaks may result.
- Install the engine front cover. Refer to ENGINE FRONT COVER INSTALLATION .
- Install the engine oil pan. Refer to OIL PAN REPLACEMENT
.
Important: Do not reuse the original seal (O-ring) when installing the crankshaft position sensor to the engine front cover. Erratic engine operation may result.
- Install the CKP sensor. Refer to CRANKSHAFT POSITION (CKP) RELUCTOR RING REPLACEMENT in Engine Performance.
- Install the water pump. Refer to WATER PUMP REPLACEMENT in Engine Cooling.
- Install the crankshaft balancer. Refer to CRANKSHAFT BALANCER REPLACEMENT .