LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 4.3L >> Repair Instructions >> On-Vehicle Repair Instructions >> Drive Belt Idler Pulley Replacement - without Air Conditioning >> Installation Procedure

Installation Procedure

Fig 1: Installing Drive Belt Idler Pulley - Without Air Conditioning
G01643608Courtesy of GENERAL MOTORS CORP.
NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  1. Install the drive belt idler pulley and bolt to the power steering pump mounting bracket.

    Tighten 

    Tighten the bolt to 50 N.m (37 lb ft).

  2. Install the drive belt. Refer to DRIVE BELT REPLACEMENT  .
scientia non olet · About LEMON Manuals