LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Removal & Installation >> Parking Brake Pedal >> Removal

Parking Brake Pedal: Removal

  1. Release parking brake.
  2. Raise vehicle.
  3. Loosen equalizer.
  4. Lower vehicle.
  5. Remove release handle cable and grommet from the parking brake pedal assembly.
  6. Depress locking tabs and remove release handle from instrument panel.
  7. Disconnect electrical connector from the parking brake switch.
  8. Remove bolts.
  9. Disconnect parking brake cable from the lever. The locating tab on the lever must be straightened to release the cable.
  10. Depress the locking tabs on the parking brake cable housing and remove cable housing from the pedal assembly.
  11. Remove lever assembly from vehicle.
scientia non olet · About LEMON Manuals