LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Removal & Installation >> Brake Booster Accumulator >> Installation

Brake Booster Accumulator: Installation

  1. Lubricate all seals and metal friction points with power steering fluid.
  2. Install accumulator and O-ring seal.
  3. Place piston compressor over the end of the accumulator.
  4. Install nut on the stud.
  5. Depress accumulator with a C-clamp.
  6. Install accumulator retainer ring.
  7. Release C-clamp.
  8. Remove nut from the stud.
  9. Remove piston compressor tool.
  10. Install hydraulic booster.
  11. Install master cylinder to hydraulic brake booster.
  12. Install master cylinder nuts. Tighten to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals