LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Stationary Window System >> Repair Instructions >> Stationary Window Reveal Molding Repair >> Removal Procedure

Removal Procedure

CAUTION: Refer to GLASS & SHEET METAL HANDLING CAUTION in Cautions and Notices.

Important:  The window reveal molding fills the cavity between the body and window. If the reveal molding is stretched or damaged, it cannot be reused and it must be replaced.

  1. Lift up on the loose area of the reveal molding.
    Fig 1: Lifting Up Loose Area Of Reveal Molding
    G01566745Courtesy of GENERAL MOTORS CORP.
  2. Clean the top edge of the window surface and the reveal molding with a 50/50 mixture of isopropyl alcohol and water by volume on a dampened lint-free cloth.
  3. If the reveal molding cannot be reused, refer to URETHANE ADHESIVE INSTALLATION OF STATIONARY WINDOWS .
scientia non olet · About LEMON Manuals