Passenger Door Unlock Operation -w/ Keyless Entry

When any of the door lock switches are placed in the unlock position, voltage is applied to the door unlock control circuit and the unlock relay winding. Since the other side of the unlock relay winding is connected to ground, the relay is energized. This causes the contacts to close and complete the path from the PWR ACCY circuit breaker through the battery voltage circuit. Voltage is then applied to the unlock side of the door lock actuators. Since the other side of the passenger(s) door lock actuators are connected to the normally closed contacts of the lock relay to ground, the doors unlock.

The unlock function can also be accomplished by the BCM supplying voltage to the door lock control circuit by a keyless entry unlock transmission.