LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Seat Cushion Cover Replacement - Front (YC7) >> Removal Procedure

Removal Procedure

  1. Remove the bucket seat from the seat risers. Refer to SEAT REPLACEMENT - BUCKET  .

    Important:  Note the position and length of the bolts you remove. This will assist with reassembly.

  2. Remove the bolts that retain the seat back hinges to the seat cushion frame. Refer to SEAT BACK FRAME REPLACEMENT - FRONT  .
  3. Remove the J-hooks that retain the seat cushion cover and pad to the seat cushion frame.

    Important:  Note the locations of the hog rings for reassembly.

  4. Remove the hog rings that retain the seat cushion cover and pad to the seat cushion frame.
  5. Remove the seat cushion cover and pad from the seat cushion frame.
    Fig 1: Removing Seat Cushion Cover And Pad From Seat Cushion Frame (Front YC7)
    G01567058Courtesy of GENERAL MOTORS CORP.

    Important:  Note the locations of the hog rings for reassembly.

  6. Remove the hog rings that retain the seat cushion cover to the pad.
  7. Remove the seat cushion cover from the pad.
    Fig 2: Removing Seat Cushion Cover From Pad (Front YC7)
    G01567059Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals