LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Seat Cushion Cover Replacement - Front (YC7) >> Installation Procedure

Installation Procedure

  1. Install the seat cushion cover to the pad.
  2. Install the hog rings that retain the seat cushion cover to the pad in the locations noted during disassembly.
    Fig 1: Installing Seat Cushion Cover To Pad (Front YC7)
    G01567060Courtesy of GENERAL MOTORS CORP.
  3. Install the seat cushion cover and the pad to the seat cushion frame.
  4. Install the hog rings that retain the seat cushion cover to the seat cushion frame in the locations noted during disassembly.
  5. Install the J-hooks that retain the seat cushion cover and pad to the seat cushion frame.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  6. Install the bolts that retain the seat back hinges to the seat cushion frame.

    Tighten 

    Tighten the bolts to 30 N.m (22 lb ft).

  7. Install the bucket seat to the seat risers. Refer to SEAT REPLACEMENT - BUCKET  .
    Fig 2: Installing Seat Cushion Cover And Pad To Seat Cushion Frame (Front YC7)
    G01567061Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals