Removal Procedure
- Raise the vehicle to a suitable height.
- Remove the front section of the assist step extension. Refer to ASSIST STEP PLATE REPLACEMENT
.
- Remove the screws from the left rear outer edge of the assist step extension.
- Lift upward on the assist step extension until fully released from the retainer.
Courtesy of GENERAL MOTORS CORP.
- Remove the screws from the right rear inner and outer wheel well.
- Open the sliding door to expose the screw.
- Lift upward on the assist step extension until fully released from the retainer.
Courtesy of GENERAL MOTORS CORP.
- Remove the rear section of the assist step extension.
Courtesy of GENERAL MOTORS CORP.