LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Rear End >> Repair Instructions >> Roof Drip Molding Replacement - Rear >> Removal Procedure

Removal Procedure

  1. Use the appropriate drill bit in order to drill the head from the rivet (2).
  2. Remove the rivets (2).
  3. Remove the roof drip molding (1).
    Fig 1: Removing Roof Drip Molding - Rear
    G01567398Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals