LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Rear End >> Repair Instructions >> Roof Drip Molding Replacement - Rear >> Installation Procedure

Installation Procedure

  1. Use the weatherstrip adhesive GM P/N 12345096, the Canadian P/N 993365, or the equivalent in order to install the roof drip molding (1).
  2. Use a hand-held rivet gun in order to install the new rivets (2).
    Fig 1: Installing Roof Drip Molding - Rear
    G01567399Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals