LEMON Manuals
: Even more car manuals for everyone
Home
>>
GMC
>>
2003
>>
Safari Van Cargo, AWD
>>
Repair and Diagnosis
>>
Body & Frame
>>
Door Locks
>>
Theft Deterrent System
>>
Diagnostic Information and Procedures
>>
DTC B3033: BCM Is Reading A Tamper Code From The Passlock™ Sensor
>>
Conditions for Clearing the DTC
Conditions for Clearing the DTC
The DTC will clear once an ignition cycle occurs without the fault recurring.
The BCM history codes will clear after 100 ignition cycles occur without the fault recurring.
Use a scan tool.