LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Diagnostic Information and Procedures >> Wiper Arm Tip Pressure Check

Wiper Arm Tip Pressure Check

Fig 1: Checking Wiper Arm Tip Pressure
G01566277Courtesy of GENERAL MOTORS CORP.
  1. Run the wiper arm and blade assemblies to the mid wipe position.
  2. Remove the blade from the arm.
  3. Attach a scale to the wiper arm tip and measure the force required to lift the arm perpendicular to the windshield to the normal working height of the arm (the height with the blade attached).

    The force required should be between 8.3 and 10.1 newtons (30 to 36 ounces).

  4. Replace the arm if tip pressure is not within specifications.