LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting Systems >> Repair Instructions >> Hazard and Turn Signal Flasher Replacement >> Installation Procedure

Installation Procedure

  1. Position the flasher module (1) to the IP convenience center.
  2. Engage the flasher module until fully seated and the retaining tab clicks.
  3. Close the driver door.
    Fig 1: Installing Hazard And Turn Signal Flasher
    G01566208Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals