Playing a Compact Disc (Uplevel): PWR

Press the PWR knob in order to turn the system on.
The system can be turned on by inserting a compact disc into the player with the ignition in the ON position.
Insert a disc partway into the slot, label side up.
The player pulls the disc in.
When inserted, the disc will begin playing track 1.
Wait a few seconds until the disc plays.
The letters "CD" and a CD symbol appears on the display.
If the disc comes back out and ERR appears on the display, inspect for the following conditions:
The disc is upside down.
The disc is dirty, scratched, or wet.
There is too much moisture in the air.
Wait an hour and try again.
The vehicle is operating on a very rough road.
The disc player is very hot.
Press RECALL in order to eliminate the ERR message.