Removal Procedure
- Remove the rubber side rail cap from the center support.
- Remove the bolts from the center supports.
- Remove the bolts from the end supports.
- Remove the luggage carrier as an assembly from the roof with an assistant.
- Remove the side rail support gaskets.
Courtesy of GENERAL MOTORS CORP.
- Remove the screws from the side rail supports.
- Remove the side rail supports from the side rails.
- Remove the screws from the cross rails.
- Remove the cross rails from the sliders.
- Remove the screws from the sliders and the lock plates.
- Remove the sliders from the slots in the side rails.
Courtesy of GENERAL MOTORS CORP.