LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Jimmy 4D Utility, 4WD, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Closeout/Insulator Panel Replacement - Left >> Installation Procedure

Installation Procedure

  1. Install the remote control door lock receiver module to the instrument panel sound insulator.
  2. Connect the electrical connector to the remote door lock receiver module.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the screw that retains the instrument panel sound insulator to the cowl panel.

    Tighten 

    Tighten the screw to 1.9 N.m (17 lb in).

  4. Install the screws that retain the instrument panel sound insulator to the knee bolster.

    Tighten 

    Tighten the screws to 1.9 N.m (17 lb in).

  5. Feed the DLC through the hole in the instrument panel sound insulator.
    Fig 1: Installing Instrument Panel Sound Insulator To Cowl Panel Retaining Screws
    G01476619Courtesy of GENERAL MOTORS CORP.
  6. Install the screws that retain the DLC to the instrument panel sound insulator.

    Tighten 

    Tighten the screws to 2.4 N.m (21 lb in).

scientia non olet · About LEMON Manuals