LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Jimmy 4D Utility, 4WD, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Closeout/Insulator Panel Replacement - Instrument Panel (I/P) Lower >> Removal Procedure

Removal Procedure

  1. Remove the center console from the vehicle if equipped with RPO code YC7 (GMC Envoy). Refer to CONSOLE REPLACEMENT - FRONT FLOOR (FULL LENGTH (AUTO TRANS))  or CONSOLE REPLACEMENT - FRONT FLOOR (FULL LENGTH (ENVOY))  or CONSOLE REPLACEMENT - FRONT FLOOR (NON-FULL LENGTH)  or CONSOLE REPLACEMENT - FRONT FLOOR (FULL LENGTH (MANUAL TRANS)) .
  2. Remove the screws that retain the instrument panel sound insulator to the following components:
    • The knee bolster
    • The instrument panel
    • The heater assembly
    • The floor duct
  3. Remove the instrument panel sound insulator from the vehicle.
  4. Disconnect the electrical connector from the accessory power outlet, if equipped.
    Fig 1: Closeout/Insulator Panel - Instrument Panel Lower
    G01476620Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals