LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Stoplight Switch >> Installation

Stoplight Switch: Installation

  1. Install the electrical connector to the stoplight switch.
  2. Install the stoplight switch and the pushrod to the brake pedal pin. See Fig 1.
  3. Install the pushrod retainer on the brake pedal pin. The retainer will snap into place.
Fig 1: Removing & Installing Stoplight Switch
G00305465Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals