LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Park Brake Cable - Rear RWD Pickups >> Removal

Park Brake Cable - Rear RWD Pickups: Removal

  1. Release the park brake, if applied.
  2. Raise and support the vehicle.
  3. Loosen the adjuster nut at the equalizer.
  4. Remove the rear park brake cable from the park brake connector. See Figure.
  5. Remove the rear park brake cable adjuster from the equalizer.
  6. Remove the brake drum. See BRAKE DRUM .
  7. Remove the rear brake shoes. See DRUM BRAKE SHOE .
  8. Disconnect the rear park brake cables from the chassis and rear axle housing retainers.
  9. Disconnect the rear park brake cable from the park brake level.
  10. Collapse the park brake cable locking finger at the backing plate.
  11. Remove the park brake cable from the backing plate.
  12. Remove the rear park brake cable from the vehicle.
scientia non olet · About LEMON Manuals