LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Park Brake Cable - Rear 4WD Pickups And Utilities >> Installation

Park Brake Cable - Rear 4WD Pickups And Utilities: Installation

  1. Install the park brake cable frame retainers.
  2. Install the park brake cable in the rear axle housing retainers, if removed.
  3. Install the park brake cable in the brake caliper bracket.
  4. Install the park brake cable on the park brake actuator.
  5. Install the park brake cable on the equalizer.
  6. Install the park brake cable in the connector.
  7. Adjust the park brake. See PARK BRAKE ADJUSTMENT  under ADJUSTMENTS & INSPECTION.
  8. Lower the vehicle.
scientia non olet · About LEMON Manuals