LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Park Brake Actuator - Disc >> Removal

Park Brake Actuator - Disc: Removal

  1. Release the park brake.
  2. Raise and support the vehicle.
  3. Remove the tire and wheel assembly.
  4. Relieve the tension from the park brake cables by loosening the nut at the equalizer.
  5. Remove the rear park brake cable from the park brake actuator lever.
  6. Remove the park brake cable from the mounting bracket by depressing the locking tabs.
  7. Remove the rotor. See BRAKE ROTOR - REAR .
  8. Remove the axle shaft. See appropriate AXLE SHAFT article in DRIVELINE/AXLES.
  9. Remove the park brake shoe. See PARK BRAKE SHOE - DISC .
  10. Remove the backing plate bolts.
  11. Remove the park brake actuator lever housing from the backing plate.
scientia non olet · About LEMON Manuals