LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Master Cylinder >> Removal

Master Cylinder: Removal

  1. Apply the parking brake and block the wheels.
  2. Disconnect the brake pipes from the master cylinder.
  3. Plug the open brake pipe ends with rubber plugs.
  4. Remove the master cylinder nuts and bolts.
  5. Remove the master cylinder from the vehicle.
  6. Drain the master cylinder reservoir of all the brake fluid.
  7. Remove the reservoir from the master cylinder, if needed
scientia non olet · About LEMON Manuals