LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Master Cylinder Fluid Level Sensor >> Removal

Master Cylinder Fluid Level Sensor: Removal

  1. Remove the air cleaner intake duct.
  2. Disconnect the electrical connector from the fluid level sensor.
  3. Using needle nose pliers, compress the locking tabs at the opposite side of the master cylinder. See Figure.
  4. Remove the fluid level sensor from the reservoir
scientia non olet · About LEMON Manuals