LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Master Cylinder Fluid Level Sensor >> Installation

Master Cylinder Fluid Level Sensor: Installation

  1. Install the fluid level sensor until the locking tabs snap into place.
  2. Connect the electrical connector to the fluid level sensor.
  3. Install the air intake duct.
Fig 1: Removing & Installing Master Cylinder Fluid Level Sensor
G00305456Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals