LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Drum Brake Hardware >> Installation

Drum Brake Hardware: Installation

  1. Install the actuator lever and the lever pivot.
  2. Install the actuator lever return spring.
  3. Install the hold down pins.
  4. Install the hold down springs.
  5. Install the brake shoe guide.
  6. Install the brake shoe return springs.
  7. Install the brake drum.
  8. Install the tire and wheel assembly.
  9. Adjust the brakes. See DRUM BRAKE SYSTEM  under ADJUSTMENTS & INSPECTION.
  10. Lower the vehicle.
scientia non olet · About LEMON Manuals