LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Disc Brake Hardware - Rear >> Removal

Disc Brake Hardware - Rear: Removal

  1. Remove the disc brake caliper. See BRAKE CALIPER - REAR .
  2. Remove the disc brake pads.
  3. Remove the disc brake pad retainers.
  4. Remove the caliper pins from the disc brake caliper mounting bracket.
  5. Remove the caliper pin boots from the disc brake caliper mounting bracket.
  6. Lightly wire brush all brake pad contact areas in order to remove any corrosion.
scientia non olet · About LEMON Manuals