LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Disc Brake Hardware - Front Dual Piston >> Removal

Disc Brake Hardware - Front Dual Piston: Removal

  1. Raise and support the vehicle.
  2. Remove the tire and wheel assembly.
  3. Remove the front brake caliper. See BRAKE CALIPER - FRONT DUAL PISTON .
  4. Remove the front brake pads. See BRAKE PADS - FRONT DUAL PISTON CALIPER .
  5. Remove the brake pad wear sensors.
  6. Remove the bushings from the mounting bracket.
  7. Lightly brush all brake pad contact areas.
scientia non olet · About LEMON Manuals