LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Brake Hose >> Removal (Front)

Removal (Front)

  1. Raise and support the vehicle.
  2. Remove the front tire and wheel assembly.
  3. Clean all dirt and other foreign material from the brake hoses and brake pipe fitting.
  4. Using a backup wrench on the brake pipe fitting, disconnect the brake pipe fitting from the brake hose fitting.
  5. Disconnect the brake pipe fitting from the flex brake hose at the frame.
  6. Remove the front brake hose retainer at the frame bracket.
  7. Remove the hose front flex brake hose bolt and gaskets from the brake caliper.
  8. Remove the brake hose from the brake caliper.
  9. Remove the copper gaskets from the brake hose bolt. These gaskets may stick to the brake caliper or the brake hose bolt.
scientia non olet · About LEMON Manuals