LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Brake Caliper - Front Dual Piston >> Removal

Brake Caliper - Front Dual Piston: Removal

  1. Raise and support the vehicle.
  2. Remove the tire and wheel assembly.
  3. Remove the brake caliper hose bolt from the brake caliper. See Figure.
  4. Remove the 2 copper gaskets from the brake hose bolt. These gaskets maybe stuck to the brake caliper and/or the brake hose end.
  5. Discard the 2 copper gaskets.
  6. Plug the opening in the front brake hose in order to prevent excessive brake fluid loss and contamination.
  7. Remove the brake hose and washers from the brake caliper.
  8. Remove the brake caliper guide pin bolts.
  9. Remove the brake caliper assembly.
scientia non olet · About LEMON Manuals