LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Adjustments & Inspection >> Park Brake System >> Park Brake Shoe Inspection - Rear Disc

Park Brake Shoe Inspection - Rear Disc

  1. Raise and support the vehicle.
  2. Remove the tire and wheel.
  3. Remove the rear brake caliper and bracket. See BRAKE CALIPER BRACKET - REAR  under REMOVAL & INSTALLATION.
  4. Remove the rear brake rotor. See BRAKE ROTOR - REAR  under REMOVAL & INSTALLATION.
  5. Inspect the park brake shoe and lining and replace if any of the following conditions are found: Excessive wear indicated by the park brake lining being worn down to the shoe. Brake lining cracking. Oil or fluid contamination of the brake lining.
  6. Adjust the park brake shoe. See PARK BRAKE ADJUSTMENT .
  7. Install the rear brake rotor. See BRAKE ROTOR - REAR  under REMOVAL & INSTALLATION.
  8. Install the rear brake caliper and bracket. See BRAKE CALIPER BRACKET - REAR  under REMOVAL & INSTALLATION.
  9. Install the tire and wheel.
  10. Lower the vehicle.
scientia non olet · About LEMON Manuals