LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Jimmy 2D Utility, Automatic, Standard >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Instrument Panel, Gages, And Console >> Repair Instructions >> Console Replacement - Front Floor (Full Length (Manual Trans)) >> Removal Procedure

Removal Procedure

  1. Remove the shift control lever. Refer to CONTROL LEVER AND/OR BOOT REPLACEMENT in Manual Transmission - NV 1500 or to CONTROL LEVER AND/OR BOOT REPLACEMENT in Manual Transmission - NV 3500.
  2. Remove the cup holder insert.
  3. Remove the screws that retain the trim plate to the console.
  4. Remove the trim plate from the console.
    Fig 1: Removing Trim Plate To Console Retaining Screws
    G01476674Courtesy of GENERAL MOTORS CORP.
  5. Open the storage compartment cover.
  6. Remove the storage compartment.
    Fig 2: Storage Compartment
    G01476675Courtesy of GENERAL MOTORS CORP.
  7. Remove the nuts that retain the console to the vehicle.
  8. Disconnect the electrical connector, if equipped.
  9. Remove the console from the vehicle.
    Fig 3: Removing Console To Vehicle Retaining Nut
    G01476676Courtesy of GENERAL MOTORS CORP.