Installation Procedure
- Install the sunroof motor/actuator (1) to the vehicle.NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
- Install the screws that retain the sunroof motor/actuator (1) to the sunroof assembly.
Tighten
Tighten the sunroof motor/actuator screws to 3.5 N-m (31 Ib in).
- Connect the electrical connectors, as needed.
- Install the straps that retain the wiring harness.
- Install the headliner. Refer to HEADLINER REPLACEMENT (PICKUP) or HEADLINER REPLACEMENT (UTILITY) in Interior Trim.